Two PUDU MT1 Max robotic sweepers

PUDU MT1 Max

AI-Powered 3D Perception Robotic Sweeper
Book a DemoView Specs
PUDU MT1 Max

Outdoor & Semi-Outdoor Sweeping, AI-Powered

The PUDU MT1 Max sweeps up everything from cigarette butts to large bottles. 3D perception, AI adaptive cleaning and smarter obstacle avoidance keep it working safely around vehicles and people, and its auto-empty station takes care of the trash.

3D Perception Integration
AI Adaptive Cleaning
Covers Up to 100,000 m²
Auto-Empty Station
MT1 Max 3D LiDAR point cloud of a car park
3D Perception Enhancement

Sees Clearly, Day or Night

Equipped with a 3D perception system (3D LiDAR + multi-sensor fusion), MT1 Max maps environments accurately, detects obstacles in real time, and navigates efficiently even in high ceilings, nighttime, or heavy interference, ensuring reliable performance in complex cleaning tasks.

MT1 Max sweeping paper litter in a car park
Empty the Facility of Any Dirt & Trash

From Cigarette Butts to Large Bottles

MT1 Max removes everything from cigarette butts and paper scraps to large bottles in a single sweep. Automatic filter cleaning keeps operation and maintenance in one loop, minimizing manual intervention and maximizing continuous productivity.

70 cm Sweeping Width
35 L Trashbin Capacity
0 cm Edge-to-Edge Cleaning
Dual-chip AI processing inside the MT1 Max
Magic Cleaning

Dual-Chip AI Processing

MT1 Max features a dual-chip architecture for faster, more precise AI processing with built-in redundancy. Hardware-software collaboration lets sensors and motors work in sync, enabling AI adaptive cleaning, trash recognition, and spot cleaning.

MT1 Max sweeping debris in a car park
AI Adaptive Cleaning Strategy

Cleaning That Adapts to the Debris

Cleaning Mode Adaptation

Light debris triggers automatic power reduction to prevent scattering; heavy debris increases power for thorough cleaning.

Cleaning Posture Adaptation

Automatically adjusts angle to guide debris into the dual brush gap, reducing misses.

Smart Obstacle Avoidance Upgrade

Safe Around Vehicles and People

MT1 Max features a fully upgraded obstacle avoidance system with 3D LiDAR, enabling smarter dynamic avoidance and differentiated strategies.

MT1 Max stopping for a car in a car park

Dynamic Vehicle Avoidance

MT1 Max can stop to let vehicles pass, pause at lane entrances, or edge aside while keeping the route clear and traffic undisturbed.

MT1 Max avoiding a pedestrian in a car park

Pedestrian and Animal Avoidance

Quickly reacts to sudden “pop-out” movements or animals crossing, enhancing overall safety.

MT1 Max at its auto-empty station beside a trash bin
Auto-Empty Station

Empties Itself, Then Keeps Going

PUDU MT1 automatically heads to the station to empty waste into an on-site trash bin, then returns to resume cleaning, all without manual intervention.

Dumping Triggered
Head to the Station
Auto Emptying
Resume Cleaning
Intelligent Active Interaction

Senses and Responds to Its Surroundings

MT1 Max features multi-dimensional safety upgrades. Combining structural protection with intelligent responses, along with audible and visual alerts, slope climbing and obstacle overcoming, and proactive rain avoidance, it actively senses and intelligently responds to its environment.

Dust on the MT1 Max LiDAR housing

Full IP54 Sealing

Defends against dust ingress and water spray for consistent reliability.

MT1 Max warning light glowing in a car park

Warning & Projection Lights

A 1.2-meter high warning light and a safety projection light, combined with audible and visual alarms, make MT1 Max visible to pedestrians and vehicles, proactively preventing potential risks.

Water-drop sensor*: automatically detects water drops and triggers a protective avoidance mode, guiding the robot to safe zones while reducing electrical risks.

MT1 Max docked at its charging station
24/7 Continuous Operation

Around the Clock, Without Downtime

High-capacity batteries, rapid charging, and auto-docking technology enable continuous 24-hour operation to meet high-frequency cleaning demands without downtime.

Rapid Charging
24-Hour Operation
Unleash the Power of IoT

Connected Across Your Site

Elevator

Elevators

E-gate

E-gates

PUDU Link app showing the MT1 Max

PUDU Link

PUDU MT1 Max

Product Overview


PUDU MT1 Max
Dimensions840 × 600 × 675 mm
(33 × 23.6 × 26.6 in)
Weight85 kg (187.39 lb)
Cleaning CapabilitiesSweeping
Cleaning PerformanceCover cleaning: max. 2,200 m²/h (23,680.6 ft²/h)
Spot cleaning: max. 7,000 m²/h (75,347 ft²/h)
Charging Time< 3.5 h
Run-time5–10 h, Standard Mode 8 h
Battery Capacity60 Ah
Cruise Speed0.2–1.2 m/s (adjustable)
(0.66–3.94 ft/s)
Cleaning Width70 cm (27.6 in) with side brush
NavigationVSLAM + Marker + 3D LiDAR SLAM
Waste Container Capacity35 L (9.25 US gal)
Auto-Empty Station
Dimensions (L × W × H)760 × 2010 × 680 mm
(29.9 × 79.1 × 26.8 in)
Weight57.8 kg (127.4 lb)
Compatible ModelsMT1, MT1 Max (paired with waste box)
Max. Supported Trash Can Height1350 mm (53.1 in)
Input Voltage100–240 VAC
Input Current1.5 A, max. 10 A
Working Temperature−10 to 45 °C (14 to 113 °F)
Storage Temperature−20 to 70 °C (−4 to 158 °F)

*Do not perform cleaning tasks in extreme weather.

See the MT1 Max on your site

Book a demo with our team. We'll walk your facility, answer your questions and show you how MT1 Max fits your cleaning routine.

Book a Demo